TECH TIP
chevy aveo a/c blows hot air
Aug. 11 2020
Aug. 11 2020

Vehicle: 2009 Chevrolet Aveo, L4-1.6L

Mileage: 98,266

Problem: The vehicle was brought to the shop because the A/C was not working.

Details: The tech connected a scan tool and found no diagnostic trouble codes. Next he checked to be sure all the related fuses had battery (B+) voltage. They did. After that, the tech verified that the vehicle had a manual HVAC system with a V5 compressor, then connected his A/C gages. The refrigerant level was low, and the A/C compressor clutch would not engage.

He charged the A/C system with 1.1 lbs. of refrigerant.

NOTE: The low-side and high-side refrigerant pressures at idle were: 75/140 PSI. At 2500 RPM, they were: 80/140 PSI. The A/C lines were warm, and the radiator cooling fan was not running. He replaced the A/C pressure sensor, but it did not help. At this point he called ALLDATA Tech-Assist.

The Tech-Assist consultant advised to first verify that the evaporator temperature sensor, engine coolant sensor and high-pressure sensor readings were within specifications. He added that, if the tech found no problems, he should check the A/C compressor control valve in the back of the compressor for debris and make sure that the valve moved freely.

aveo_compressor

Confirmed Repair: After verifying that all three sensor values were within specifications, the tech inspected the A/C compressor control valve at the back of the compressor. It was stuck. He replaced the control valve and the air conditioner blew cold air again. Fixed!

 

BONUS Tech-Assist A/C Tip!

How to Test for Large A/C Leaks When the Charging Station Refuses to Charge

Say a vehicle is brought in with no refrigerant in the A/C system or you have completely evacuated the system. If the recovery/charging station determines that there is a "large leak", it may not allow you to recharge the system. How to find the leak under those conditions?

Easy! Use a nitrogen leak test kit to find the leak. You can fill the system with nitrogen as per the kit’s instructions and listen for any hissing sounds, and/or use the supplied solution to create bubbles at the leak site.

The ALLDATA Tech-Assist team fields cases like this every day. See how Tech-Assist can help your shop save time and money with on-call diagnostic support from ASE-certified Master Technicians. More Tech Tips 

Not an ALLDATA customer? For access to this valuable experience-based repair data and reliable OEM information, start a free trial today.

If you would like to read more articles like this one please subscribe to ALLDATA News.

Sign up for ALLDATA News