Get fast, organized access to the most-used specifications and maintenance procedures all in one place.

Accessing the Specification Quick Reference

1. Select a vehicle.

2. Under Information >> ALLDATA Reference, select Specifications Quick Reference.

   • Notes: 
     • Opening the Specifications Quick Reference from the Vehicle level will display all available specifications for the entire vehicle.
     • Opening the Specifications Quick Reference from a component, will only display the specifications available for that component group (e.g., engine, brakes, etc.).

   

    

Information available in the Specifications Quick Reference

Note - Available information will vary by selected vehicle

• Brakes
  • Bleeding Sequence and scan tool requirements.
  • Brake Lining (thickness)
  • Rotor/Drum (thickness, runout and variation)
• Chassis
  • Axle Nut/Hub Nut (torque)
  • Ball Joint Wear (measurement)
  • Wheel Lug Nut (torque)
• Engine 
  • Cylinder Identification (image)
  • Engine Oil Drain Plug (torque)
  • Engine Oil Filter (torque)
  • Fuel Filter Location
  • Fuel Pressure Specifications
  • Ignition Firing Order (image and text)
  • Serpentine Belt Routing (image)
  • Spark Plug (gap and torque)
• Fluids
  • Brake Fluid (type)
  • Clutch Fluid (type)
  • Coolant (type and capacity)
  • Diesel Emission Fluid (type and capacity)
  • Differential Fluid (type and capacity)
  • Engine Oil (type and capacity)
  • Final Drive Fluid (type and capacity)
  • Power Steering Fluid (type)
  • Refrigerant (type and capacity)
  • Refrigerant Oil (type and capacity)
  • Transfer Case Fluid  (type and capacity)
  • Transmission/Transaxle Fluid (type and capacity)