Vehicle: 2008 Toyota Camry, L4-2.4L (2AZ-FE), Automatic Transaxle
Mileage: 207,009
Problem: The vehicle was towed in for a crank, no start condition.
The technician checked for DTCs – there were none. Next, he did some testing with his DVOM and discovered that the fuel pump was not getting B+ voltage on the GRY E12 wire from the C/OPN relay in the engine room junction box, located on the driver’s side of the engine compartment.
He verified B+ voltage at the BLU wire E7, and LT GRN D12 wire. There was a good ground at the YEL E8 wire.
The C/OPN relay had everything needed to operate the fuel pump.
On this vehicle, the relay is integrated into the engine room junction box, and not serviceable on its own.
Confirmed Repair: He replaced the engine room junction box. After that, the engine started and ran normally.s
The ALLDATA Tech-Assist team fields cases like this every day. See how Tech-Assist can help your shop save time and money with on-call diagnostic support from ASE-certified Master Technicians. More Tech Tips
Not an ALLDATA customer? For access to this valuable experience-based repair data and reliable OEM information, start a free trial today.
If you would like to read more articles like this one please subscribe to ALLDATA News.