Product Support

What's New

Current Version Numbers:

Hardware
  • Vehicle Connection Interface (VCI) Software - 19.2.2133​​.1
  • Vehicle Connection Interface (VCI) Firmware - 49
Application
  • Android - 1.146.94.918
  • Windows - 4.146.888.0 
  • iOS - 2.0.146.468

September 2021

Mobile Application

Versions:
  • iOS: 2.0.146.468

  • Android: 1.146.94.918

  • Windows: 4.146.888.0 

Updates:
  • Full Diagnostics on iPad - Use your iPad for full diagnostics functionality, including System Tests, Live Data and Actuations. 

  • Data Manager  - Access all your DTC Scans, PDF Reports and Live Data Recordings under a central location under the “Data Manager” tile - See More

Vehicle Connection Interface

Diagnostics VCI Version - 19.2.2133.1

Update Overview:
  • Support for Enhanced Diagnostics features on iPad

  • More Land Rover support and additional vehicle improvements.

Update Details

BMW / MINI / Rolls-Royce

  • Fixed DTC tables not aligning for select engine series

Chrysler-family

  • Added Transmission entry for Jeep Wrangler '06

GM-family

  • Fixed the vehicle type for the Cadillac XT6 which caused it to show only Generic Powertrain

Honda / Acura

  • Fixed ABS Sensor Calibrations for the Honda CR-V '20

Land Rover

  • Added Telematics Battery Replacement Reset

    • PreActivate Telematics Control Unit

    • Activate Telematics Control Unit

    • Network Registration Status Telematics Control Unit

    • Telematics Control Unit Operational Mode

    • Server Communication Request Telematics Control Unit

  • Added Speed Control Alignment for CCM

  • Added Auto High Beam Camera Calibration for HCM

  • Added System Flush AWD Control Module and High Oil Temperature Reset for AWD Control Module

  • Added End Of Line Test

    • Tight Tolerance Mode

    • Air Suspension Deflation

    • Geometry Setup

    • Air Suspension Build Mode

    • Air Suspension Inflation

  • Added ABS System Functions for 18MY+ Discovery, Discover Sport, Evoque, Ranger Rover, and Velar:

    • ABS Configuration Clear

    • Pressure Sensor Calibration

    • Steering Angle Sensor Calibration

    • Calibrate Electric Park Brake

    • Apply And Release Electric Park Brake

    • Release To Service Position

    • Exit Maintenance Mode

  • Added Camera Calibration for Image Processing Module 'A' forward camera setup

  • Added Dynamic Seat Belt Retract And Release for Seat PreTensioner Module

  • Added Seat Occupancy Reset System Function for Restraint Occupancy Sensor Control

  • Added Power Steering Soft-Lock End Stops Reset Routine for Power Steering Control Module

  • Added missing Height Sensor voltage sensors to Headlamp Control A Module

  • Improved connectivity to Restraint Occupancy Sensor Control systems

  • Fixed Discovery Sport showing diesel System Functions on a gasoline engine

  • Fixed Discovery Sport missing Side Object and Headlamp systems

  • Fixed issue with Rain Sensor Calibration not completing

June 2021

Mobile Application

Versions:
  • Android - 1.142.93.850

  • Windows - 4.142.803.0

Updates:
  • Live Data Recording & Playback - Record PID data from the Live Data screen. Record button gets enabled once 1 or more PIDs are selected.

    • The technician can stop recording at any point using the Stop button. Technicians can use the Mark button to place a marker on the recording for easy reference during playback later.

    • View recordings from the Recordings tab at the top right. Number of unviewed recordings show up in the recordings tab for easy reference. User also has the ability to delete any recordings that they no longer need. Click any recording to start playback.

    • Live Data playback opens in graph view by default. During playback, the user can move the graphs positions on the screen using the ‘move’ cursor in the top right corner of each graph.

    • Users also have the ability to zoom in and out of the graph if they need to see more granular data.

    • Users can hit the “Skip to Marker” option to directly go to any markers they placed during recording.

  • Enhanced Demo Mode - Enhanced Demo Mode now includes additional vehicles with DTCs that represent a more realistic vehicle problem.

    • 2018 Toyota Camry

    • 2019 Chevy Silverado

    • 2019 BMW 3 series

    • 2017 Ford F150

  • Modified Change System Workflow - Change system has now been removed from the connect button and instead has been added to the footer for easy and quick access.

Vehicle Connection Interface

Diagnostics VCI Version - 19.2.2125.1

Update Overview:
  • Finalizes the 21MY support and continues to improve enhanced GM, Porsche, and VAG support. 

Update Details

BMW / MINI / Rolls-Royce

  • Fixed issue when clearing DTCs on MY21 vehicles

  • Updated DTC definitions for UDS modules

  • Updated CBS for MY21 vehicles

  • Added CBS 6 for MY 21 Vehicles

  • Added PAD Mode Enable for F Series and G Series vehicles

  • Updated DTC definitions for UDS modules

  • Fixed issue when clearing DTCs on MY21 Vehicles

Chrysler-family

  • Added Clear Variant, Reset TCU Variant, and EEPROM system tests for the TCM Var 09 module (i.e. Dodge Nitro '11)

  • Added the sending of the system reset command for CAN-based tests, if we get a failure when trying to send the start command. This is done just in-case the module accepted it but we had some issue causing it to fail we make sure the command in this case has been canceled.

  • Added newly released MY21 coverage for: 

    • Chrysler 300

    • Chrysler Pacifica

    • Dodge Challenger

    • Dodge Charger

    • Dodge Durango

    • Jeep Renegade

  • Finalized 21MY support  

  • Added TCM Var 60 support (i.e., Dodge Dart 1.4 Liter '13) 

  • Fixed sensor labeling issue that showed duplicate O2 Sensors for NGC3-based modules (i.e., Dodge Dakota '04)  

Ferrari / Maserati

  • Added Quattroporte 17MY coverage

Fiat / Alfa Romeo 

  • Finalized 21MY support

  • Added ECM ISO 0001504018 support (i.e., Alfa Romeo Giulia '18) 

Ford / Lincoln / Mercury 

  • Added 21MY support

  • Added 21MY Bronco Sport support

  • Added more 21MY support

  • Fixed Escape '13 IMP-B not being supported

  • Fixed Escape Hybrid '20 and '21 OCS Passenger Weight Rezero not being supported

  • Fixed Transit '19 RVC Configuration not working

GM-Family

  • Added Cadillac CT4 and CT5 to the model list

  • Added entry for the Chevrolet Aveo '13

  • Added Fuel Composition Reset actuation to the 4.8 Liter L20 (A) '11-'13 engine

  • Added Steering Wheel Angle Sensor Learn and Torque Sensor Calibration actuation for the Chevrolet Malibu '04

  • Added support for Global-B vehicles:

    • CT4 '20+

    • CT5 '20+

    • Corvette '20+

    • Escalade '21+

    • Suburban '21+

    • Tahoe '21+

    • Yukon '21+

    • Global-B modules not supported at this time:

    • Chassis Control Module - Auxiliary (CAN-FD)

    • Right Front Seat Back Video Display (DOIP)

    • Fixed injector coding for the 6.6 Liter L5P engine

  • Finalized 21MY support  

  • Added specific system test entries for the following tests that provide test status sensors when supported: 

    • Adaptive Pressure Control Learn 

    • Brake Pedal Position Sensor Learn 

    • Brake Pressure Sensor Calibration 

    • Clear Drive Window Learned Values 

    • Clear Left Rear Window Learned Values 

    • Clear Passenger Window Learned Values 

    • Clear Right Rear Window Learned Values 

    • Engine Oil Life Reset 

    • Fuel Trim Learn 

    • HVAC Actuators Learn 

    • Idle Learn Reset 

    • Passenger Presence Sensor Learn 

    • Range Actuator Learn 

    • Steering Position Sensor Learn 

    • Steering Wheel Angle Sensor Learn 

    • Engine Oil Life Reset 

    • Yaw Rate Sensor Learn 

  • Added Pressurize and Depressurize System for the Suspension Control Module (i.e., Cadillac XTS '15)

  • Updated Engine VIN Decoding tables for MY21 vehicles 

  • Fixed an issue where fail to detect the Automatic Transfer Case System when attempting to pull DTCs  

  • Fixed an issue on CAN-based Trucks where the Resetting of the transmission adaptions did not show up in the system test list 

  • Fixed Reductant Heater 1/2/3 actuations in the Glow Plug Module for the Chevrolet Silverado '15 

  • Fixed an issue where we had duplicate transmission entries listed for some vehicles (i.e., Cadillac CTS '11) 

  • Fixed system spelling on the GMC Yukon XL '21 for the Right Side Obstacle Detection Control Module system  

Honda / Acura

  • Added Front Camera Module system for the Honda Civic '14+ and Honda Insight '19+

  • Added Calibrate All sensors for the ABS Type 4 module (i.e. Honda Accord '10)

  • Added the possible conditions why the ISO-based ABS controller failed the Calibrate All sensors.

  • Added Active Damper system to the Honda Civic support list

  • Added Auto Multi-Camera Aiming system test for the Multi-View Camera And Parking Assist System

  • Fixed an issue where older transmission actuations weren't showing up for older vehicles ISO vehicles

  • Fixed the ABS communication issue with the Acura MDX '16, Honda Accord Hybrid '16'-17, and Acura ILX 16+

  • Updated the instructions for the IDAS Radar Aim system test in replacing 'Radar' with 'reflector/target'

  • SWS Initialization will now specifically display only the SWS CAN Initialization system test if it's supported on the currently connected SRS CAN module

  • • Added missing Acura TLX '21 system support: Electric Servo Brake System And Parking Assist System 

  • Added Front Camera CAN Module to the Honda Accord '13+ 

  • Added Honda CRV Hybrid model support 

  • Added Honda Clarity VIN decoding 

  • Added CAN-based Active Damper System support 

  • Added IMA Motor, IMA Battery, and Electro Servo Brake system for the Honda Clarity 

  • Updated ABS Bosch support for the Acura MDX to include MY09 

  • Fixed in the SRS CAN system the byte index offset for the Left and Right SWS sensors  

Hyundai / Kia

  • Added Camera Image Correction SW Management support for Rear View Monitor

  • Added Service Reminder Setting SW Management support for CLU

  • Finalized 21MY support

  • Added Niro / Ioniq HCU LDC SW Management functions

    • Initialization Of Engine Clutch Inspection

    • Remove Air From Engine Clutch Hydraulic Pressure Line

    • Engine Clutch Motor Resolver Adaptation 

    • Stabilization Of Engine Clutch Hardware Transfer Torque

    • Stabilization Of Hydraulic Oil Flow Of Engine Clutch

  • Added Palisade / Telluride SW Management BSD Radar Calibration 

  • Added Theta III 2.xL Enhanced Powertrain CAN system support 

  • Fixed Palisade / Telluride EPS SW Management SAS Calibration not working

Jaguar

  • Added MY21 Coverage

Lamborghini

  • Added MY21 variants for the Aventador, Huracan, and Urus support

  • Finalized 21MY support 

Land Rover

  • Added MY21 Coverage

  • Added Defender L663 Coverage

 Mazda

  • Added reset support of all Learned Values for 21MY engines

Mercedes-Benz

  • Added Coverage for MY21 CLS Chassis

  • Added Coverage for MY21 GLC Chassis

  • Fixed issue where the CAN BUS would go offline during an All Module DTC Read on MY21 vehicles

  • PAD Mode will now automatically be set on F Series and G Series vehicles

Nissan / Infiniti

  • Fixed QX60 2013 missing from coverage table

  • Fixed BCM Rev11 showing Historical codes with the Past codes list

  • Improved 21MY support

  • Added QX55 22MY support

  • Fixed ITM / MultiAV, IPDM, and Sonar support not selecting the correct DTC table with Retrieve ALL DTCs request 

  • Fixed Meter MA not responding on Versa 20 / 21 models

Porsche

  • Added Engine Slave system for the Cayenne (92A)

  • Cleaned up Enhanced Powertrain sensors for the 992

  •  Added Adaptive Cruise Control 2 (Left Sensor) system support 

  • Added new System Tests: 

    • Coolant bleed for 991 and 981 engines 

    • Air Conditioning Servo Motor Teaching 

    • Engine Oil Filling 

    • Engine Rough Running Test 

    • TPMS Teach Wheel Sensors 

  • ADAS support in BETA: 

    • Adaptive Cruise Control Alignment Procedure system test (Panamera 971, 992) 

    • Front Camera Calibration system test for the Front Camera system and Onboard Camera system (992, Macan, Panamera 971)  

    • Lane Change Calibration system test 

    • Rearview Camera Calibration system test 

  • Updated the DTC Descriptions for the Cayenne V6T and V8T Engine variants 

  • Changed the Adaptive Cruise Control (ACC) module to Adaptive Cruise Control (Master / Right Sensor) 

  • Fixed Reset Maintenance Interval for the 992 including the Service History Write feature 

Subaru

  • Added support to show all controllers during DTC All check

  • Fixed Driver Monitor, Push Keyless Access Start, Push Keyless Access Collation not pull past DTCs

  • Finalized 21MY support

  • Removed FFD support from product until it can be resolved [NOTE: OCC still has History code support]

Toyota / Lexus / Scion

  • Added TVD Utilities CheckMode and Learning Value Initialization

  • Improved Front Beam Axis Adjustment for Camry 20MY

  • Fixed Front Beam Axis Misalignment Reading not reporting the correct error value 

  • Fixed missing Back Door DTCs 

VAG (Audi / VW / Bentley / Skoda / SEAT)

  • Added 29Bit CAN addressing support for the Engine and Transmission

  • Added new system sensor support for the Bentley Bentayga '19

  • Updated the vehicle body code support for MY21 vehicles

  • Updated VIN decoding for Skoda and SEAT

  • Fixed when reading and clearing DTCs on Bentley where we where missing detecting a module even though we successfully found as a CAN TP2.0 module due to a CAN TP1.6 attempt

  • Added Brake Pad Replacement for UDS-based module variants 

  • Added missing sensor grouping lists the for the following systems (Bentley Mulsanne '13):  

    • Information Control Unit 

    • Right Rear Door Control Unit 

    • Special Function 2 

  • Added BETA ADAS Sytem Tests support: 

    • Adaptive Cruise Control Static Calibration

    • Adaptive Cruise Control Alignment Procedure

    • Camera Calibration system test for the Front Sensors Driver Assistance System and Onboard Camera 

    • Lane Change Calibration 

    • Rearview Camera Calibration

  • Updated model VIN decoding (i.e., A1) 

  • Added Static DPF Regeneration for: 

    • AUDI A3 2013> CRLB, CLHA, CRBC 

    • Fabia 2015> All Diesel 

    • Octavia 2013> All Diesel 

    • Superb 2016> All Diesel 

    • 3G Passat All Diesel 

    • Golf 7 All Diesel 

    • AUDI A6 2011-2018 Engine codes: CNHA, CSUD, CSUE, DDCA, DDCB, DDDA, CGLC, CGLD, CGLE, CMGB 

  • Added DPF Regeneration when driving for: 

    • AUDI A3 2013> CRLB, CLHA, CRBC

April 2021

Mobile Application

Versions:
  • iOS - 2.0.140.345

Updates:
  • VCI Support (Bluetooth Low Energy) - The ALLDATA app now supports scan-only functionality with the ALLDATA Diagnostics VCI device for iPad and iPhone.

    • NOTE: Live Data, System Tests and Actuations are not available on the iOS app right now. These functionalities will be added a future release.

Vehicle Connection Interface

Diagnostics VCI Version - 19.0.2105.3

Update Overview:
  • Introducing 21MY support and continued improvements to enhanced BMW and Porsche.

Update Details

BMW / MINI / Rolls-Royce
  • Added 21MY support

  • Added J29 (Toyota Supra) Instrument Cluster variants

  • Added Ghost model support

  • Added 8 Series model support

  • Added support for electric 48V systems

Chrysler-family
  • Added missing transmission sensors for the PCM Variant 26 module (i.e. Dodge Journey '16)

  • Added new Body Control Module variant for the Dodge RAM ProMaster '20

  • Fixed issue with Fill Air system test performing on the Air Suspension Control Module

  • System Tests that have multiple options available for the user to choose from are now displayed in a combo box

  • Added 21MY support

  • Fixed VIN programming for PCM Var 23 modules (i.e. Jeep Wrangler '13)

Fiat / Alfa Romeo
  • Added MY21 coverage

Ford-family
  • Added 21MY support

  • Fixed MKX 11 - 15MY not having the Headlight Control Module available

  • Fixed Navigator and Expedition 11 - 20MY BCM missing sensors for PATs

  • Fixed Edge 13 - 20MY PCM missing EVAP Temperature sensors

GM-family
  • Added 21MY support

    • Note: Global-B vehicles NOT currently supported

      • CT4 '20+

      • CT5 '20+

      • Corvette '20+

      • Suburban '21+

      • Tahoe '21+

      • Yukon '21+

  • Fixed an issue where the Chevrolet Cobalt '11 didn't show all of the possible supported body systems

Honda / Acura
  • Added the Auto Multi-Camera Aiming for the Multi-View Camera System (i.e. Acura MDX '14+)

  • Added MDX Hybrid model to the list

  • Fixed issue with the SWS CAN Initialization failing due to the total seat weight being out of range

  • Fixed issue with ABS CAN All Sensor Calibrations where on some vehicles do not support the clear command at the beginning of the test

  • Added 21MY support

  • Fixed ABS table issue for the Acura MDX vehicles

  • Fixed the ABS table for the Honda Crosstour

  • Fixed detecting KWP2000 modules when attempting to read and clear DTCs from All Systems

Hyundai / Kia
  • Added 21MY support

  • Added K5 model support

  • Added Electric Water Pump Control, HSG Resolver Calibration, Remove Air From Engine Clutch Hydraulic Pressure Line, Stabilization Of Hydraulic Engine Clutch S/W Management support for HEV models

  • Added Remove Air From Engine Clutch Hydraulic Pressure Line, Stabilization Of Hydraulic Engine Clutch, Compression Pressure Test Of Engine Cylinder S/W Management support for HEV models

  • Added Isolation Breakdown Detection Function S/W Management support for HEV models

  • Improved HEV sensor lists and actuation instructions 

Jaguar
  • Added 21MY support

Lamborghini
  • Added support for detecting dataset that didn't require to match against dataset version

Land Rover
  • Added 21MY coverage

  • Redid sensor groupings and the narrowing of the diagnostic sensor list for USD-based modules

  • Added more DTCs for diesel and petrol ECMs

  • Added Defender (L663) model support

  • Fixed EnhancedPowertrainCAN not reporting DTCs if they take longer than 1 second to report

Mazda
  • Added 21MY support

  • Fixed ABS DTC retrieval for Mazda3 20MY+

Mercedes-Benz
  • Added 21MY

    • Note: S-Class 223 chassis not supported at this time

  • Added Injector Adjustment and Fuel Pump Activation System Test for MED41

  • Added Oil Level Check for 9G Transmission

Mitsubishi
  • Added 21MY support

Nissan / Infiniti
  • Added 21MY support

  • Fixed BCM Rev11 not clearing codes on certain Nissan models

  • Fixed Maxima 20MY not supporting Lane Camera system

Porsche
  • Added 21MY support

  • Added Taycan model support

  • Cleaned up supported Drive Link and System Test List

Subaru
  • Added 21MY support

  • Added Ventilation Seat, Front Relay Control Module, and Door Mirror Drivers for Outlook and Legacy models

  • Completed support for Ventilation Seat, Front Relay Control Module, and Door Mirror Drivers

  • Fixed EnhancedPowertrainCAN not pull past DTCs

  • Fixed EnhancedPowertrainCAN actuations not resetting after an error was displayed

Toyota / Lexus
  • Added Front Recognition Camera PCSImageInfoClear, InitialAxisAdjustValueDisplay, RecogCameraTargetPosMemory, RecogCameraAxisAdjust
     

  • Fixed Master / Slave Beam Axis Adjustment completing the process but never stating it was done

  • Added 21MY support

VAG (Audi / VW / Bentley / Skoda / SEAT)
  • Added CAN TP1.6 support for Bentley modules that only support that protocol (i.e. Bentley Continental '14)

  • Redid sensor groupings and the narrowing of the diagnostic sensor list for USD-based modules

  • Added 21MY support

January 2021

Mobile Application

Versions:
  • Android - 1.134.91.737

  • Windows - 4.134.671.0​

Updates:
  • Dynamic VCI Update Notification - VCI update notifications in the app are dynamic. This allows us to notify you about VCI updates independent of an app update.

  • FCA “Learn More” video - The “Learn More” hyperlink in the FCA settings now takes you to a training video to help get set up with AutoAuth.

  • Product Feedback Enhancement - The Product Feedback link has now been added to the main page of the diagnostics app to allow you to quickly submit product feedback.

  • FCA Enhancement - If you do not enter FCA unlocking credentials while connected to an FCA vehicle, advanced functionality will now be disabled for selection.

Bug Fixes

  • Cancelling a rescan causes app to be inoperable

  • ‘Next’ button is not visible for Inspections in Windows app

  • Quick scan/manual scan issue when VIN is not decoded

  • Unable to download PDF Reports on Android 10 device

November 2020

Vehicle Connection Interface

Diagnostics VCI Version - 18.3.43.1

Update Overview:
  • More 20MY support and improvements with enhanced BMW, Chrysler, GM, Honda, and Porsche coverage.

  •  Fixed VIN decoding for Dodge Sprinter Vans.

Update Details

BMW / MINI
  • Improved module identification for UDS vehicles
  • Improved module description to include variant information
  • Added VIN decoding for Q3 '20
  • Changed the selection text 'Chassis Designation' option to 'Chassis' as the full string was getting cut off in the UI
Chrysler-Family
  • Added 'Actual Line Pressure 1' sensor to PCM Variant 23 (i.e. Dodge Journey '12)
  • Added 'Exhaust Pressure' sensor to the PCM Variant 20 (i.e. Dodge Cummings '12)
  • Added the new ABS and Airbag ISO variant for the Dodge ProMaster '19-'20
  • Added 5.3 Liter LH6 (M) engine support for the body code 'T' '07 vehicle (i.e. GMC Envoy '07)
  • Added 'Throttle Position - Relative' sensor to the Dodge Cummins '03 (CMM845 module)
  • Added new ABS variant 48 support (i.e. Chrysler Voyager '20)
  • Added support for the Ram C/V '12 - '13 vehicle
  • Added missing Exhaust CAM Crank Difference and Intake CAM Crank Difference sensors for the PCM Var 22 (i.e. Dodge Durango '12)
  • Added supporting data sensors for the VVT Intake Phaser 1/2 and VVT Exhaust Phaser 1/2 system tests
  • Added the option either a quick scan or a full network and module scan for Network Test
  • Added Reset Injector Compensation Values system test to PCM Var 19 (i.e. Dodge Cummins '19+)
  • Fixed Learn ETC for CAN 29bit-based vehicles (i.e. Dodge Dart '14)
  • Updated sensor support for the HVAC variant 7 module (i.e. Chrysler Aspen '09
  • Fixed an entry for engine selection where the engine options was 8.5 Liter and All. 
  • Changed the selection to '8.5 Liter' and 'All Others'.
  • Changed the 'Set Cruise Speed Max' and 'Set Road Speed Max' system test enter units from KPH to MPH
  • Moved the notification of re-badged vehicles to when the user selects the specific make, model, and year; Rather than waiting for the user to make an attempt to go into an enhanced system.
  • Added support for decoding Dodge Sprinter VINs
Ford-family
  • Added Clutch System Test support for DS6 and DS9 transmissions
  • Fixed F250 Super Duty 5.4L / 6.2L '14 - '20 controller coverage issues
  • Fixed F250 Super Duty 5.4L / 6.2L '14 - '20 VIN decoding as an F350
  • Fixed Escape 13 - 14MY missing TPMS Learning and Keyless Entry Code support
  • Fixed F150 15 - 20MY missing some VCT and knock sensors PIDs
  • Fixed Transit 15 - 19MY missing some VCT and knock sensors PIDs
GM-Family
  • Added missing VIN Decode for a Saturn VUE '08
  • Added GM KWP module specific VIN pulling
  • Added Fuel Composition Rest for the 2.2 Liter LE8 and 2.4 Liter LE9 '11-'09
  • Added a stand alone function test for Reductant System Malfunction Warning Service Bay Test
  • Added Misfire Cylinder 7/8 sensors for the 4.8 Liter L20 engine '09-'13
  • Fixed the actuation test for the Reductant System Malfunction Warning Test (i.e. Chevrolet 2500 6.6 LML '12)
  • Fixed the Secondary Air Injector System actuation for the 3.6 Liter LFX (3) engines
  • Fixed VIN decoding issue for the Chevrolet Silverado '14 
  • Fixed the system names for the "Short Range Radar Sensor" systems causing the first system to be pulled for DTCs and then bypassed for the rest (i.e. Cadillac Escalade Left/Right Front/Rear modules)
  • Updated engine code for the MY20 3.6 Liter LFX (F) engine listing
  • Improved the system test 'Network Test' overall UI update rates and test speed 
  • Fixed issue with software freezing when attempting to retrieve Enhanced Freeze Frame on CAN-based modules with a single DTC having multiple Freeze Frames
  • Added Automatic Brake bleed procedure for the for the Chevrolet Corvette '01-'04
  • Added HVAC Control Module - CJ3 support to Light Truck body codes C and K '12 - '13
  • Fixed missing settings for the secondary air injection actuations on the '10 3.6 Liter LLT (V)
  • Fixed Saturn CKP relearn for the 2.2 Liter
  • Added HVAC Control Module - CJ2 support to Light Truck body codes C and K '13
  • Fixed the Depressurize Fuel Pressure actuation on Light Trucks (i.e. Chevrolet Silverado '17)
  • Added Supplemental Restraint system support for the Cadillac CTS '13
  • Moved the notification of re-badged vehicles to when the user selects the specific make, model, and year; Rather than waiting for the user to make an attempt to go into an enhanced system.
Honda / Acura
  • Fixed issue when trying to detect the ABS module on a vehicle when the module has already been successfully initialized
  • Fixed issue in the SRS CAN module where the Knee Airbag Deployment sensor wasn't being displayed
  • Fixed an issue on older Honda vehicles where we failed to pull the module's serial number for Engine and Transmission on first attempt at communicating with those systems
  • Fixed the sensor name from Camera Aiming Status to Dynamic Aiming Status in the Front Camera Module
  • Added a requirement to cycle the ignition key after performing the SWS Initialization just before we move onto the after collision check
  • Added the Integrated Driver Assist support for the Honda HRV
    • Fixed the EGR system test for the CAN-based vehicles that had the Absolute Throttle installed (i.e. Honda Fit '08)
  • Moved the notification of re-badged vehicles to when the user selects the specific make, model, and year;
      Rather than waiting for the user to make an attempt to go into an enhanced system.
  • Fixed fault tables for detecting airbag deployment DTCs on SRS03, SRS06, and SRS11
  • Fixed issue connecting to an ABS Type-1 controller with H99B protocol (i.e. Honda CR-V '10)
  • Removed other system tests found in ABS CAN system except for Calibrate All Sensors to remove any confusion on what test needs to be performed. Also updated test instructions to match the factory tool steps.
Hyundai / Kia
  • Improved Theta II 2.4L engine DTC list
  • Fixed Kia Sorento 3.xL 18MY Enhanced Powertrain not connecting
Jaguar
  • Fixed FPace TPMS not communicating because of wrong CAN addressing
  • Fixed FType R 16 - 17MY Enhanced Powertrain CAN security unlock failing
  • Fixed some SCP controllers that don't report DTCs by design (DDM, PDM, DSM, PSM, BPM) not showing zero DTCs in a DTC All retrieval
Lamborghini
  • Added MY20 system support for Huracan, Aventador, and Uruz
  • Finalized 29Bit CAN System Support
  • Added the option either a quick scan or a full network and module scan for Network Test
  • Added the Uruz systems under the correct corresponding system groupings in vehicle selection
  • Added new DTC descriptions for MY20 support
Land Rover
  • Improved VIN model decoding for Evoque and Range Rover models
  • Finalized Evoque 20MY system coverage
Mazda
  • Finalized Mazda3 20MY missing systems
  • Fixed Mazda6 18MY+ and CX9 18MY+ labelling of Parking Sensor Module as Passenger Seat Module
Mercedes Benz / SMART
  • Added CLA 118 20MY chassis support
  • Added MED41 engine Control unit for C Class, CLA Class, GLE Class
  • Added Door Control Module for GLE Class, CLA Class, and Sprinter
  • Added C Class C205 20MY model support
  • Improved Sprinter 907 model support to include missing controllers and resolved connection issues with 19MY and later versions
  • Improved E Class W213 / C238 model support to include missing controllers and resolved connection issues with 19MY and later versions
  • Improved VIN retrieval for all late-model vehicles
  • Improved connectivity for 20MY vehicles
Nissan / Infiniti
  • Fixed missing 6 Channel Gateway for QX80 18 - 19MY
  • Fixed issue where diesel engine descriptions were overriding gas / petrol engine descriptions for the same DTC
  • Added new Sonar and ADAS controllers for the 20MY vehicles
  • Improved 20MY vehicle support
  • Improved VIN decoding 20MY vehicle support
  • Improved system determination for all ADAS, ADAS Sub, EPS, EPKB, Sonar, Telematics controllers
  • Fixed Airbag for 20MY vehicles not showing the ECU Part Number or trouble Diag Record Work Support
  • Fixed Auto Back Door for 20MY Murano not reporting DTC descriptions
Porsche
  • Added engine support for the Panamera GTS '13-'16
  • Fixed issue unlocking 992 Cluster for Service Resets
  • Updated VIN decoding for RoW
  • Added the option either a quick scan or a full network and module scan for Network Test
  • Added Write Maintenance Interface for the Cayenne vehicles
  • Added new Lane Change Assist variant support for the Boxster S '17
  • Added support for a third transmission address on earlier Panameras (970)
  • Fixed issue with Drive Link status reporting incorrect values while the Drive Link test is running
  • Fixed issue where extra system tests where showing up on Instrument Cluster's on newer Panameras (971)
Subaru
  • Improved Generic OBDII compatibility on pre-CAN vehicles
  • Fixed Freeze Frame not working on pre-CAN vehicles
Toyota / Lexus / Scion
  • Added Rav4 EV 12 - 14MY full model support
  • Fixed Lexus UX VIN decoding incorrectly
  • Added Blindspot System Monitor support for Beam Axis Display and Beam Axis Adjustment 
  • Added Front Radar Sensor support for Front Beam Axis Adjustment, Front Beam Misalignment Reading, Front Radar Acceleration Sensor Calibration
  • Added Front Recognition Camera support for History Clear, PCS Image Information Clear, PCS Image Record Setting, Recognition Camera / Target Position Memory, Initial Axis Adjust value Display, Recognition Camera Axis Adjust
  • Fixed AFS Steering CAN not reporting all DTCs on the module
VAG Support (Audi / VW / Bentley / Skoda / SEAT)
  • Added MY20 coverage
  • Added SEAT and Skoda vehicle support into our VAG coverage
  • Added an option for '08 - Measuring Blocks' to the Functional Test for KWP1281, KWP2000, and CAN TP2.0 modules
  • Added more internal table support for older Non-UDS modules:
    • Adaptions, Basic Settings, Long Coding, Soft Coding and Output Tests
  • Added VIN retrieval on KWP1281-based vehicles
  • Fixed test name formatting for Adaptions and Basic Settings functional tests
  • If sensor descriptions are available for a connected module (KWP1281, KWP2000, or a CAN TP2.0) we will only show those sensors in the sensor list, not the entire possibly sensor grouping list
  • Added VW Phideon model support
  • Added the option either a quick scan or a full network and module scan for Network Test
  • Added new DTC descriptions for 20MY support
  • Fixed issue with incorrect DTC descriptions on non UDS-based module
  • Moved the notification of re-badged vehicles to when the user selects the specific make, model, and year; Rather than waiting for the user to make an attempt to go into an enhanced system.

October 2020

Mobile Application

Versions:
  • iOS - 2.0.130.204

Updates:
  • Navigation & Design Updates

  • Generate PDF Reports

  • New and Improved Graph View

  • Live Data PID Grouping

  • Min-Max Ranges

  • No More Drive Test Mode - Seamlessly switch between online and offline functionality.

September 2020

Mobile Application

Versions:
  • Android - 1.128.90.639

  • Windows - 4.128.539.0

Updates:
  • Fiat Chrysler Automobiles (FCA) secure gateway, for 2018 model year vehicles and newer, can now be unlocked in order to clear DTCs, actuate modules, complete system tests, etc. - Learn More

    • Notes:

      • VCI device must be updated to latest firmware version.

      • Device and user registration through a 3rd party (AUTOAUTH) is required.

  • Recent vehicle scan history is now available to be viewed from the app home page. - Learn More

Other Enhancements

  • Custom PID Ranges - Custom min/max thresholds added to PID’s now persist as long as the user is connected to the system.

  • Zoom Support - When zooming in using the tablet display settings, you can now scroll to see all the export options.

  • Hyundai Genesis Scans - Genesis vehicles can now be scanned without having to turn off WI-Fi first.

  • Automatic Email - Selecting "Automatically send email" under settings now automatically brings up the export options at the end of a scan.

  • Display Default Device on Scan Button - Added capability to display the name of the default device on scan vehicle button on the home page.

Vehicle Connection Interface

VCI Firmware Version - 49

Update Overview:
  • Includes support for FCA secure gateway access

May 2020

Mobile Application

Versions:
  • Android - 1.102.64.1428

  • Windows - 4.123.452.0

Updates:
  • Navigation & Design Changes

  • Sensor Grouping and min/max range thresholds for live sensor data

  • Generate PDF Reports while offline

  • Seamless switching between offline and online modes when losing connection to WiFi

    • No more "Drive Test" mode to turn on/off

  • Android Phone Support - DTC scan and export

    • Note: Advanced features like Emissions Monitor, Live Data, Actuations, System Tests and access to other ALLDATA products is not available with the phone version of the app.

Vehicle Connection Interface

Diagnostics VCI Version - 18.1.22

Update Overview:
  • More 2020 model year support and improves Chrysler, GM, Honda, and Porsche coverage.

  • Bug fixes

Update Details

Chrysler / Dodge-family
  • Added Injector coding for the Dodge RAM Eco-Diesel '20 (PCM Var 18)
  • Added ORC Initialization support for the following variants (43, 45, 60, 61, 90)
  • Updated transmission sensors for the Dodge Cummins '19+ (PCM Var 19)
  • Improved sensor coverage for the Dodge RAM Eco-Diesel '20 (PCM Var 18)
  • Added Learn ETC and Quick Learn RFE for the PCM Var 49 module (i.e. Jeep Wrangler / Gladiator)
  • Added the Dodge R1500 ECO Diesel '20 (Var 18)
  • Updated the Dodge Caravan '20 ABS Module address
  • Updated the following system variants for MY20:
    • Chrysler Pacifica
      • Rear Cabin Comfort Controls Var 40
    • Jeep Compass
      • Drivetrain Control Module Var 90
      • Entertainment Telematic Module Var 90
      • Occupant Classification Module Var 90
      • Transmission Control Module Var 65
    • Jeep Cherokee
      • Electronic Shifter Module Var 64
      • Park Assist Module Var 61
    • Jeep Grand Cherokee
      • Comfort Seat Wheel Module Var 43
      • Display Screen Module Var 40
  • Added 20MY support
  • Added ADAS programming for the following modules:
    • Adaptive Cruise Control
      • ACC Alignment
        • Earlier module will require targets (i.e. Chrysler 300 '07+ - ACC Var 01)
    • Central Vision Processing Module
      • Service Calibration
    • Driver Assistance System Module
      • ACC Alignment
    • Forward Facing Camera Module:
      • FFCM Service Calibration
      • Service Single Pole Calibration (requires targets)
  • Added a more comprehensive ABS ECU Initialization system test for the following newer vehicle modules:
    • Chrysler Pacifica
      • Dodge Ram
      • Jeep Gladiator
      • Dodge Cummins
  • Added ABSO ECU Initialization system test (i.e. Chrysler Pacifica)
  • Added Transmission system option for the R1500 '09 and '10
  • Fixed Powertrain Memory Reset System Tests
  • Added a second entry for the engine code 3.0 Liter LF1 for the Y VIN code
  • Added the following ADAS calibration actuations:
    • Distance Sensing Cruise Control Module Service Alignment
    • Front View Camera Camera Learn
    • Long Range Radar Sensor Module Radar Learning
    • Video Processing Control Module Camera Alignment (requires target mats)
  • Fixed issue where SIR was not showing up for the Chevrolet Silverado '06 Body C/K
  • Fixed issue where SIR was not showing up for the GMC Envoy '06 Body C/K
  • Fixed Idle Learn Reset for the '09 5.3 Liter LC9 (3) Truck engine
Ford-family
  • Fixed SRS Airbag not reading DTCs on older ISO / K-line variants
  • Finalized Lincoln 20MY support
  • Added 20MY support
GM-family
  • Added the following system to the Cadillac Escalade '15:
    • Active Safety Control Module
    • Left Front Short Range Radar Sensor Module
    • Left Rear Short Range Radar Sensor Module
    • Right Front Short Range Radar Sensor Module
    • Right Rear Short Range Radar Sensor Module
  • Added the following system tests for for the 6.6 Liter L5P and 6.6 Liter L8T diesel engine:
    • DPF Regeneration
    • Injector Flow Rate Programing
    • Copy ECM Injector Flow Rates to GPCM
    • Copy GPCM Injector Flow Rates to ECM
  • Added missing ECT Sensor for the Buick Lacaross '13 2.4 Liter LAF (C)
  • Fixed the sensor list option for Fuel Rail Pressure Sensor in the 6.6 Liter LHP (Y) '17 - '20 engine support
  • Added actuations to the Glow Plug Control Module system '06 - '11
  • Added Fuel Composition Reset actuation for the following:
    • '13 5.3 Liter LC9 (7)
    • '10 6.0 Liter L96 (G)
    • '10 6.2 Liter L9H (2)
    • '10 4.8 Liter L20 (A)
  • Added Cylinder Injector actuations to the Chevrolet Equinox 2.4 Liter LAF (C) '11
  • Moved the Brake System Control Module under the Brakes system group • Improved VIN model decoding
  • Updated VIN Engine codes for the following '19 engines:
    • 2.7 Liter L3B (K)
    • 5.3 Liter L82 (F)
    • 5.3 Liter L84 (D)
    • 6.2 Liter L87 (L)
  • Updated Key FOB system test descriptions for Global-A vehicles
  • Corrected the engine code for the 4.4 Liter LC3 (9) and 4.6 Liter LD8 (Y) engine types
  • Fixed an issue pulling DTCs when there are more than one type of the same system we report the module not supported if the first system wasn't detected, but the other systems where detected and no codes where found on the system
Porsche
  • Added that we attempt to pull VIN from the Gateway first before moving on to the other methods
  • Completed new variant support for the newer Panamera and Cayenne Instrument Cluster to support the Reset Service Interval test
  • Fixed Parking Break Calibration test
  • Fixed an issue where support Drive Links were not being listed on systems
  • Fixed issue where we listed duplicate Drive Links and System Tests
  • Moved in the older supported vehicles the PASM system to the 'Other' system group and moved the PSM into the 'Brake' system group
  • Added support for the Sunroof 2 system
  • Added the Reset Service Interval New support for the newer system variants on the Panamera (971) and Cayenne (9YA)
  • Added new model support and VIN decoding for the Porsche 911 GT2 (991)
  • Renamed Lane Change Assist Master to Lane Change Assist 2
  • Updated Porsche to display module information on the newer models when the user selected 'Vehicle Information' from the menu
  • Added DTC support for the Panamera (971), 992 (911) and Cayenne (9YA)
  • Added Service Reminder Resets for the new Panamera (971), 911 (992), and Cayenne (9YA)
  • Improved DTC descriptions
  • Updated system variant table for MY20
  • Added 20MY support
  • Added system test 'Module Information' to display the current modules information
  • Added DTC descriptions for the 987's Instrument Cluster, Driver Door and Passenger Door systems
  • Added new systems (44) for the Cayenne (9YA) and Panamera (971) for Reading / Clearing DTCs
  • Added support for CAN 29Bit systems for Reading / Clearing DTCs
  • Added LED Headlight system
  • Added the option to set specific service intervals when performing Service Resets on newer vehicles
    • All Services, Main Service, Between Maintenance, Oil Service
  • Added new 'System Tests' and 'Drive Link' tests for the following systems (see website for specific system support list):
    • Additional Instrument
    • Front-End Electronics
    • Lane Change Assist
    • Parking Assistant
    • Parking Brake
    • Rear-End Electronics
    • Rear Lid
    • Selector Lever
    • Steering Wheel Electronics (KLSM)
    • Stability Management (PSM)
Subaru
  • Fixed Outback 17MY not showing Reverse Automatic Braking system and Blind Spot Monitors
  • Added Reverse Automatic Braking CAN Work Support ECU Initialize / Software Information / ECU Part Number support
  • Added BlindSpot CAN Work Support Radar Alignment support
  • Improved Eyesight CAN Calibration process to inform the user if the wrong calibration target is being used
  • Fixed ODS CAN system failing to clear trouble codes
  • Added Eyesight (Gen II) Calibration system test
  • Fixed Legacy 20MY VIN decoding
  • Added Eyesight (Gen II) Calibration system test
  • Improved 20MY DTC support
  • Added 20MY support
Toyota / Lexus / Scion
  • Fixed Tundra late-model not retrieving DTCs when All selection is chosen
  • Finalized 20MY support • Improved LS500 18MY+ model support
  • Added 20MY support
  • Added ADAS programming for the Integrated Driver Assist System: Static Camera, Dynamic Camera, and Radar Aiming Calibration (requires targets)
  • Added ADAS Radar Aiming Calibration for the ACC And CMBS/FCW System (requires targets)
  • Added ADAS programming for the LKAS Camera system: Static Camera (requires targets) and Dynamic Camera
Honda / Acura
  • Fixed issue where we where showing the Total Weight sensor multiple times on SRS CAN
  • Finalized MY20 support
  • Added sensor that tells if the connected SRS CAN Module is a 2 or 4 channel weight sensors
  • Added Integrated Driver Assist for the Honda Ridgeline '19
  • Improved DTC descriptions
  • Fixed issue when changing diagnostic sessions when the module returns with a busy response
  • Fixed issue with long delay on failure to detect the Electric Power Steering System
  • Added 20MY support
  • Added ADAS programming for the following:
    • Integrated Driver Assist System:
      • Static Camera
      • Dynamic Camera
      • Radar Aiming Calibration (requires targets)
  • Added ADAS Radar Aiming Calibration for the ACC And CMBS / FCW System (requires targets)
  • Added ADAS programming for the following:
    • LKAS Camera system:
      • Static Camera (requires targets)
      • Dynamic Camera
  • Fixed the support coverage for the Honda Passport '19+
Audi / VW
  • Cleaned up sensor names
  • Fixed issue with missing systems when pulling a system support list on CAN TP2.0-based gateways
  • Added 20MY support
  • Added system test 'Module Information' to display the current modules information
  • Updated non-UDS with more module specific information
  • Improved detection speed for UDS-based modules
  • Fixed an issue when we detect the Parking Assistant 2 module but we display the Parking Assistant module instead
BMW / MINI
  • Improved fault code definitions for UDS Engine Control Modules
  • Added 20MY support
  • Added X7 full model support
Hyundai / Kia / Genisis
  • Finalized 20MY support
  • Added G70 '18 - '20 model support
  • Added SRS Airbag Real-time Information to late-models
  • Added K900 '19 - '20 model support
  • Added 20MY support
  • Added ADAS Inspection / Correction Forward Camera Angle (Driving and Stop Mode) support
Jaguar
  • Improved E Pace model support
  • Improved F Pace model support
  • Added S-Type '06 - '10 DSM, SCLM, HLS, ISM, and ACC systems support
  • Fixed S-Type '06 - '10 TCM and ICM system communications not working
  • Added 20MY support
Mercedes Benz / SMART
  • Added G-Wagon '20 support
  • Improved VIN decoding to support MY17+ Chassis
Nissan / Infiniti
  • Finalized 20MY support
  • Added Millimeter Wave Adjust support for Laser Radar systems
  • Added 20MY support
  • Improved coverage with new systems for all most late-models
  • Added 20MY support
  • Added Auto Aim and Aim Check support for Lane Departure systems
  • Added Auto Aim support for SMB
Mazda
  • Finalized 20MY support
  • Added IVD Initialization System Test for ABS on Mazda 6 19 - 20MY and Miata MX-5 18 - 20MY
  • Fixed missing WasteGate sensors not being listed for new SkyActive engines
  • Added 20MY support
  • Added Radar Aiming for Blind Spot Monitoring
  • Added FSC Aiming and Dynamic Aiming for Forward Sensing Camera
  • Added Radar Aiming and System Initialization for Smart Brake Support
FIAT
  • Added 20MY support
Land Rover
  • Added 20MY support
Mitsubishi
  • Added 20MY support

February 2020

New VCI Update Utility now available. Learn More

Vehicle Connection Interface

Diagnostics VCI Version - 17.3.0.3

Update Overview:
  • Additional model year coverage

  • Bug fixes

Update Details

Audi / VW

  • Added new module dataset information for MY19 (i.e. DTC descriptions, sensor information, ect...)
  • Fixed an issue when at times we failed to retrieve DTC descriptions for UDS-based modules

 

Chrysler-family

NOTE: Even though we continue to add FCA vehicles, bi-directional access to some 2018 and all 2019 model years require Secure Gateway registration currently in development.

  • Added Jeep Gladiator '20 support

  • Fixed issue where Security Gateway unlock message box was appearing on vehicles without a Security Gateway present

  • Updated the Air Suspension Control Module Var 40 system to support new system tests (i.e. Dodge RAM '14)

    • Air Spring Circuit Test

    • ASCM Exit Plant Mode

    • Atmosphere Valve Actuator Test

    • Component Air Mass / Pressures / Ride Height Readings

    • Compressor Circuit Test

    • Enter Plant Mode / Disable Level Control

    • Fill Spring From Reservoir

    • Height Sensor Check

    • Set Ride Height Level

    • Spring Deflate to Ambience

    • Spring Deflate to Reservoir

    • Write Suspension Height Values

 

GM-family

  • Added Fuel Composition Reset to the 5.3 Liter L59 (Z) '06 engine

  • Added transmission in '13 for the 5.3 Liter LC9 (7) and the 5.3 Liter LMG (0) engines

  • Improved determining sensor support on modules that only support dynamic sensor retrieval

 

Mercedes

  • Fixed communication issues for CAN systems on '01-'12 Mercedes

 

Porsche

  • Added VIN pulling for the pre-OBDII vehicles (except the 993 and 1st Gen Cayenne)

  • Added sensors and some basic actuations support for:

    • 911 (991) '12-'19

    • Boxster and Cayman (981 & 982) '12-'18

    • Panamera (G1) '10-'16

  • Added DTC retrieval and clearing for new UDS-based systems found on the 2nd Gen Panamera (G2) and 3rd Gen Cayenne (9YA)

  • Driver Door, Passenger Door, Rear Left Door, Rear Right Door, Driver Side Seat Memory, Passenger Side Seat Memory

  • Added Window Normalization test for the driver and passenger door modules

  • Added Drive Link system test for the following CAN TP2.0 systems:

    • Additional Heating

    • Driver Door

    • Driver Side Seat Memory

    • Lane Change Assistant

    • Passenger Door

    • Passenger Side Seat Memory

    • Rear Right Door

    • Rear Left Door

    • Trailer Hitch

September 2019

Vehicle Connection Interface

Diagnostics VCI Version - 17.2.1.2

Update Overview:
  • Improved Subaru coverage

  • Added system tests/relearns/adaptations for various vehicles 

  • Some additional 2018-2019 model year coverage

  • Bug fixes

Update Details

Audi / VW / Bentley

  • Added more MY19 and MY20 VIN decoding

  • Added new module dataset information for the Audi, VW, and Bentley

  • Added more DTC descriptions for MY19 vehicles

 

BMW / MINI

  • Added E72 X6 full Hybrid systems support

 

Chrysler

NOTE: Even though we continue to add FCA vehicles, bi-directional access to some 2018 and all 2019 model years require Secure Gateway registration currently in development.

 

  • Updated MY19 and MY20 VIN decoding

  • Added missing module variants for Dodge Journey '19, Dodge Cummins '19, Jeep Renegade '19

  • Fixed the sensor units for Air Manifold Pressure and Exhaust Manifold Pressure from kPa to inHg for the Dodge Cummings '13 (Var 24)

  • Fixed the VGT Pressure Commanded sensor for the Dodge Cummings '13 (Var 24)

  • Fixed issue where JTEC-based Dodge Cummins ('96-'99) showed no actuation support

  • Removed tire size programming options for the following vehicles as those vehicles do not support tire size programming:

    • 200, Compass, Cherokee, Dart, ProMaster, ProMaster City, Renegade

  • Removed the notification if the software currently doesn't support unlocking the security gateway when connecting to a system.

    • NOTE: We will still prompt the user once if an action has been requested that requires it to be unlocked and it's not supported (i.e. Actuations, System Tests, and Clearing DTCs)

  • Added new Jeep Renegade '18 system variant support:

    • Body Control Module

    • Entertainment Telematics Module

  • Added Engine Coolant Temperature to the PCM Var 22 module (i.e. Dodge Nitro 2011)

  • Fixed the system address for the Anti-Swaybar system (Jeep Wrangler '15)

  • Fixed communication issues on some KWP-based modules that seem to incorrectly respond to the diagnostic session change

  • Fixed 'Basic System Tests' that fail to respond when the start request is initially sent to the module

  • Fixed the system support list for the Chrysler Town and Country '08

  • Added new Jeep Renegade '19 system variant support:

    • Anti-Lock Brake System

    • Drive Train Control Module

    • Electric Power Steering

    • Electronic Shifter Module

    • Forward Facing Camera Module

    • Integrated Center Stack

    • Instrument Panel Cluster

    • Occupant Restraint Controller

    • Fixed CAN-based vehicles disconnect issue

    • Fixed VIN coding for the PCM Var 23 module

 

Fiat

NOTE: Even though we continue to add FCA vehicles, bi-directional access to some 2018 and all 2019 model years require Secure Gateway registration currently in development.

 

  • Added ABS system tests for the Fiat 500 '16-'17

  • Added FCA Security Gateway Unlock support

  • Fixed 'Basic System Tests' that fail to respond when the start request is initially sent to the module

 

Ford-family

  • Added '15 - '19 Escape TPMS Sensor Training Mode support

  • Fixed '15 - '19 Escape keyless entry code not working

  • Fixed Power Balance not working for ProLine VCI with firmware 46

  • Added missing MY19 vehicle support (Ranger)

  • Added PSD 6.7L '11 - '19 Injector Quantity Adjustment support

  • Fixed Focus 12MY+ ECM not security unlocking

 

GM

  • Added instructions for the actuations found in the Headlamp Control Module

  • Fixed MY19 Body modules communication that had the wrong CAN-based baud rate

  • Added Chevrolet Blazer '19 support

  • Added the Reductant System Reset command for the '11 6.6 Liter LML (8) engine

  • Added CKP Relearn for the 2.2 Liter L61 (D) '07-'08

  • Added CKP Relearn for the 5.7 Liter '98-'01 using the non-alternative fuel engine for light trucks

  • Added Idle Learn Reset and Reset ECM actuations to the 6.0 Liter LS2 (U) Engine '05

  • Fixed the Reductant Heater 1/2/3 actuation for the 6.6 Liter LML (8) engines

  • Fixed the pre-setting of the engine RPMs when running the Intake CMP Actuation Bank 1 / 2 (i.e. Chevrolet Camaro '11)

  • Added Transmission Fast Learn for newer Allison Transmission Modules (i.e. 6.6 Liter L5P (Y))

  • Added KeyFob programming for MY19 Global-A Body Control Module

  • Added VIN engine code for the 3.6 Liter LGZ (N) engine

  • Fixed issue when there was more than one sub-set of Engine Type selection and only Generic Powertrain is shown available

 

Honda/Acura

  • Fixed CAN-based IMA Systems when they detect no sensors

  • Fixed Connection to the Honda Ridgeline '08 as it was still running an ISO-based module

  • Added more DTC descriptions for the Blind Spot module

 

Hyundai / Kia

  • Fixed Retrieve and Clear DTCs continually repeating the operation and not ending

 

Jaguar

  • Improved 18 - 19MY coverage for all models

 

Land Rover

  • Improved 18 - 19MY coverage for all models Land Rover

  • Finalized 19MY coverage

  • Fixed issue when retrieving trouble codes and the ATCM would stop any further system from reporting codes

 

Mercedes Benz / SMART

  • Improved E Class (W213) ORC and SRS sensor coverage

 

Nissan / Infiniti

  • Added full 29Bit CAN support for new Gateway modules

 

Porsche

  • Improved speed in auto detecting of sensors

  • Combined Central and Left Headlight systems and renamed it 'Left Headlight / Central Headlight' to match more what the service guides refer to them as

  • Resolved issue when switching between systems during a DTC clear for all systems

 

Subaru

  • Added '15 - '19 Enhanced Powertrain CAN actuation support for all models

  • Added '15 - '19 Transmission CVT actuation support for all models

  • Added '17 - '19 ODS ReZero support for all models

  • Added '17 - '19 Transmission CVT Learning Value Reset support for all models

  • Added '17 - '19 Power Window System Initialization and Record Clear Work Support functions

  • Fixed '17 - '19 ODS and Transmission CVT from clearing memory

 

Toyota / Lexus / Scion

  • Improved AFS CAN PID coverage for 16MY+

  • Improved Electronic Parking Brake for '16MY+ RX450h by adding missing PIDs

May 2019

Vehicle Connection Interface

Diagnostics VCI Version - 17.1.1.4

Update Overview:
  • Added system tests/relearns/adaptations for various vehicles 

  • Some additional 2019 model year coverage

  • Bug fixes

Update Details

Audi / VW

• Added DTC descriptions for MY19 vehicles

GM-family

• Added Transmission Fast Learn for newer Allision Transmission Modules (i.e. 6.6 Liter L5P (Y))

• Added VIN engine code for the 3.6 Liter LGZ (N) engine

Honda / Acura

• Added DTC descriptions for the Blind Spot module

Hyundai / Kia

• Fixed late model scan issues

Land Rover

• Finalized 19MY coverage

Ford / Lincoln

• Added missing MY19 vehicle support (Ranger)

• Added PSD 6.7L '11 - '19 Injector Quantity Adjustment support

Toyota / Lexus

• Improved AFS CAN PID coverage for 16MY+

• Improved Electronic Parking brake for '16MY

March 2019

Mobile Application

Versions:
  • Android - 1.102.64.1428

  • Windows - 3.102.1079

Updates:
  • New and Improved Barcode Scanning - Now includes QR code support

  • Bug fixes/minor enhancements

Mobile Application

Versions:
  • iOS - 1.4.102.1250

Updates:
  • The iPad app now accesses the same Repair version as the Android and Windows apps.

  • Resolved issue of the iOS app sporadically hanging during scans.

February 2019

Mobile Application

Versions:
  • Android - 1.101.62.1404

  • Windows - 3.101.1050.0

Updates:
  • Scan Report now exports in PDF format.

    • HTML reports are available for offline scans

  • Probable Cause info available for relevant DTCs

  • Consolidated Quick Scan and Connect buttons into a single option

  • Drive Test (offline mode) can now store scan history information including: selected vehicle, systems scanned, DTCs, freeze frame and cleared codes data.

    • Information will sync to our servers for future review the next time you are online. 

  • Bug fixes/minor enhancements

Vehicle Connection Interface

Diagnostics VCI Version - 17.0.1.1 // 17.0.3.3

Update Overview:
  • Volvo - 2019 model year support

  • Honda/Acura - additional system DTC support for

    • Electrical Brake Booster

    • Memory Seat Control Module Assistant

    • Multi-View Camera & Parking Assist

  • Bug fixes

December 2018

Vehicle Connection Interface

Diagnostics VCI Version - 17.0.0.5

Update Overview:
  • Added system tests/relearns/adaptations for various vehicles (Including some 2019 model year).

  • Service resets for some Porsche models.

  • Adjustments to VCI Update Utility Page

  • Bug fixes

Update Details

  • PHP Update Pages: Removed Bluetooth settings Tab
  • PHP Update Pages: Only allow .PKG files to be uploaded to VCI
  • PHP Update Pages: Only allow files named "update-package" to be uploaded to VCI
  • PHP Update Pages: Updated copyright to 2019 within the footer
  • Fixed issue that the graphing for system tests wasn't being sent for the Ford Power Balance due to the diagnostic firmware that's installed on the embedded hardware
  • Removed the downcast of the returned value from GetMinutesRunByTheEngineWhileMILActivated
  • Turned off hardware patching for GM FF request

Audi / VW

  • Added MY19 vehicle support
  • Added CAN29bit module support (i.e. Audi A5 '18)
  • Fixed issue when attempting to clear all codes from systems we stop prematurely
  • Fixed current status update when running UDS-based Output Tests

BMW / MINI

  • Added MY19 vehicle support

Chrysler-family

  • Added Tire Size Programming for 29bit CAN networks (i.e. Jeep Compass, Jeep Cherokee, ProMaster, ProMaster City, ect...)
  • Added Desired TC Clutch sensor for the Jeep Wrangler '98 4.0 Liter
  • Added easy user access for some module configurations:
    • Auto Door Lock / Unlock Settings
    • Front And Rear Axle Nominal Tire Pressure
    • HV Battery Contactors Enable / Disable
    • Pinion Factor
    • Seat Belt Reminder
    • Shipping Status
    • Update Tire Pressure Threshold
  • Added special Hybrid Module tests (i.e. Chrysler Pacifica Hybrid)
  • Battery Pack Control Module
  • Enable / Disable HV Battery Contators
  • Isolation Fault Reset
  • Reset High Voltage Impact Event
  • Reset Weld Check Fault
  • Hybrid Control Processor
  • Impact Response
  • Reset Clutch Capacity Adaption
  • Resolver Offset Learn
  • Updated the message for the Chrysler Crossfire that it's a Mercedes SLK '04 R170 platform
  • Fixed Injector Quantity Adjustment for PCM Variant 4 vehicles (i.e. Jeep Grand Cherokee 3.0L Diesel '07)
  • Fixed issue when DTC Snapshot and Enviromental Data took longer than usual to respond

Fiat / Alfa Romeo

  • Added MY19 vehicle support
  • Added new model selection for the 500e and 500X
  • Fixed Tire Pressure Module address for the newly added Fiat 500e Entry

Ford-family

  • Fixed network errors when moving from HCAN to MCAN. These communications errors were due to a termination requirement on some models.
  • Implemented graphing fixes for Power Balance Testing

GM-family

  • Added MY19 vehicle support
  • Added model VIN decoding for MY19 vehicles
  • Added actuations for the Assist Step Controller module '07 - '08 (i.e. Cadillac '08)
  • Assist Step Learn Procedure
  • Clear Manufacturer Enable Counter
  • Left Assist Step Command
  • Right Assist Step Command
  • Added the following ADAS tests:
    • Front View Camera Learn
    • Long Range Radar Sensor Learn
    • Video Processing Control Camera Alignment (requires mats)
    • Added an entry for the DPF Service Regeneration System Test:
    • 1.6 Liter LVL
    • 1.7 Liter LUD
    • 2.5 Liter LKH
    • 2.8 Liter LWN
  • Added Cadillac XT4 model
  • Added Fuel Composition Reset for the 5.3 Liter LMG (0) '10 - '13
  • Added VPW version of SIR and PPS for the Chevrolet Colorado S/T '10 - '12
  • Fixed Transmission Shift Gear actuation for the Chevrolet Equinox 2013
  • Turned off hardware patching for GM Freeze Frame request, some vehicles where sending too large of a multi-frame payload and it was causing issues

Honda / Acura

  • Added MY19 vehicle support
  • Added message when performing clear DTCs on a ABS/VSA system that you will have to run the Calibration Tests after completing the clear

Hyundai / Kia

  • Added TPMS Write Sensor ID '18 - ' 19 G80, Elantra, Elantra GT, Ioniq, Kona, Veloster
  • Added BSD Calibration '18 - ' 19 G80, Elantra, Elantra GT, Ioniq, Kona, Veloster

Isuzu

  • Updated the vehicle selection items to only show 'All' instead of 'Not Available' if the coverage falls out of our supported coverage years

Jaguar

  • Added MY19 vehicle support
  • Added TPMS Sensor Replacement '10 - ' 18 Special Function support

Land Rover

  • Added MY19 vehicle support
  • Added TPMS Sensor Replacement '10 - ' 18 Special Function support
  • Added Transfer Case Control Module (TCCM) Replacement Solenoid, Replacement Motor, and Replacement Transfer Case special function support

Porsche

  • Added the following new support for the Cayenne '05 - '09:
    • Added system tests:
      • Active ESP System Test
      • Air Conditioning General Test
      • Air Conditioning Flap Motor Installation
      • Automated Actuations
      • Brake Bleeding
      • Brake Pressure Adjustment
      • Lateral Adjustment
      • Longitudinal Adjustment
      • Steering Adjustment
      • Tailgate Calibration
      • Headlight Left Reset
      • Headlight Right Reset
    • Added sensor support:
      • Airbag
      • Kessy
      • PSM (MK25)
      • PSM (MK25E1)
      • Tailgate
      • Tire Pressure Monitor
  • Added Headlight system support for the CAN Ext Address protocol (i.e. Macan '15)
  • Read and Clear DTCs support at this time
  • Added Service Reset for the following vehicles:
    • 911 (997 / 991)
    • Cayenne (E1 / E2)
    • Boxster / Cayan (982)
    • Macan (Cajun)
    • Panamera (G1)

Toyota / Lexus / Scion

  • Added MY19 vehicle support
  • Added support to read Current codes when retrieving Historical codes (no longer requires a second-pass)
  • Fixed TPWS Tire ID Registration not working with the latest firmware

October 2018

Vehicle Connection Interface

Diagnostics VCI Version - 16.3

Update Overview:
  • Added system tests/relearns/adaptations for various vehicles.

  • Bug fixes

Update Details

Audi / VW

  • Added '16 - Security Access' support for UDS and CANTP2.0 modules
  • Added A6 model VIN decoding back into Diagnostics, but it can share the same VIN as an A7
  • Included the following systems to the safety system selection goup:
    • Airbag 2
    • Pretensioner Front Left
    • Pretensioner Front Right
  • Fixed issue on retrieving sensors that had extremely large responses
  • Moved all function tests for UDS-based modules into a single test called 'Function Tests' like all the other protocols
  • When pulling codes we only pull 'Test Failed' DTC’s for powertrain systems

Chrysler-family

  • Added the Compass MK body code to '17 vehicle coverage
  • Added the Jeep Wrangler (JL) '18.5
  • Added Module Configuration for 29bit CAN networks (i.e. Jeep Compass, Jeep Cherokee, ProMaster, ProMaster City, ect...)
  • Added support for using a combo box on system tests that have a large list for the user to make a selection
  • Fixed issue when pulling DTC on some ORC modules (i.e. Chrysler 200 '15)
  • Fixed issue when switching between MS-CAN and HS-CAN networks some U-codes would be produced (i.e. Chrysler 300 '13)

Fiat / Alfa Romeo

  • Updated VIN decoding for Alfa Romeo

Ford-family

  • Added Powerstroke 6.4L Service Function Manual Regeneration
  • Added Focus '18 Keyless Entry support
  • Added LDWS Camera Calibration support '15 - '17 ('18 in beta)

GM-family

  • Added engine support for the 1.4 Liter LE2 (M) '17
  • Added engine support for the 6.2 Liter L94 (F) '13 (i.e. Cadillac Escalade '13)
  • Added Headlamp Control Module to the Cadillac SRX '15
  • Added the symptom code and symptom description to the main display of a pulled DTC
  • Added a new sensor grouping:
    • Start/Stop System Data
    • Tire Pressure Data
  • Added instructions for the following tests / actuations:
    • Camera Alignment Learn
    • Clear Window Learned Values
    • Liftgate Maximum Open Position Learn
    • Long Range Radar Sensor Module Learn
  • Added a new CAN network that runs as Highspeed on the GMLAN MS CAN network
  • Added missing product line codes from '10 - '13
  • Added support to try and auto select the Engine Type (8) and Product Line (4/5) for when the vehicle's model fails to decode after a VIN pull, but then the user manually selects the model.
  • Added final MY18 vehicle support:
    • Chevrolet Aveo
    • Chevrolet Bolt
    • Chevrolet Captiva
    • Chevrolet Cavalier
    • Chevrolet Express
    • GMC Savana
  • Fixed an issue when trying to decode the engine type when some engine codes have duplicate engine types i.e. Chevrolet Impala '17 engine code 'A' decoded as a 1.4 Liter LV7 (A) or 2.5 Liter LCV (A)
  • Fixed an issue where sometimes a sensor value would display 'No Error Present'
  • Fixed an issue on some older VPW-based modules we show no data on modules containing all DPID sensors (i.e. Pontiac GrandPrix '04 ABS)
  • Fixed model spelling error for the Escalade ESV
  • Improved sensor retrieval on modules requiring Dynamic PID support, but end up taking a very long time to respond (i.e. Cadillac CTS '07)

Honda / Acura

  • Added more ABS and EPS CAN-based modules DTC descriptions
  • Added more vehicle support coverage for the Blind Spot Information module
  • Added the ability for the seat weight sensor in the SRS module to report in lbs
  • Added the EPS Steering Angle Sensor Value Clear system test for the EPS CAN module
  • Added message for when H-Diag modules are off-line and might need the key cycled when trying to connect to the module (i.e. Honda Civic '04 SRS)

Mazda-family

  • Added FCS Aiming '12 - '17 (requires targets) system test
  • Added FCS Dynamic Aiming '18 system test
  • Added SBS / MRCC Radar Aiming system test
  • Added SBS / MRCC System Initialization system test
  • Added Snapshot Data for DTCs

Porsche

  • Added DTC system support for MY18
  • Added the following new support for the Cayenne '05 - '09:
  • New Systems:
    • Amplifier
    • Headlight Left
    • Headlight Right
    • MMI
    • Navigation
    • PCM Gateway
    • Seat Memory Passenger
    • Tailgate
    • Tire Pressure Monitor
  • Updated DTC Descriptions for CANTP1.6-based modules (i.e. Cayenne '05-'09)
  • Fixed DME communication on a Cayenne '05
  • Fixed DTC retrieval issues for CANTP1.6-based modules (i.e. Cayenne '05-'09)
  • Fixed communication issues when pulling DTCs from all systems and the hardware would get out of sync with the network (i.e. Panamera '18, Macan '17)

September 2018

Mobile Application

Versions:
  • Android - 1.94.51.1173

  • Windows - 3.94.835.0

Updates:

Vehicle Connection Interface

Diagnostics VCI Version - 16.2.2

Update Overview:
  • Support for majority of 2018 vehicles now available

  • Added system tests/relearns/adaptations for various vehicles.

  • Bug fixes

Update Details

Cumulative details for versions 16.2.2, 16.2.1, and 16.2.0.
Audi / VW / Bentley
  • Added 2018 support
  • Updated DTC Descriptions for UDS-based modules
  • SAE sub-code displayed along with the full SAE code for UDS-based modules
  • Added support for pulling VINs for KWP2000-based engine modules via non-OBDII commands
  • Added support for pulling VINs for UDS-based engine modules via non-OBDII commands
  • Added Audi RS5, Bentley Bentayga, and VW Atlas models
    NOTE: At this time software unable to decode VINs down to their more specific models
  • Improved communication on KWP2000-based modules that report multiple system busy responses
  • Updated VIN make and model decoding
Chrysler-family
  • Updated PCM Variant 22 sensor and table configurations for newer version release
  • Added the following systems for the Crossfire '04 -'08:
    • Instrument Cluster
    • Shift Level Assembly
    • Theft Alarm (SKREEM)
    • Tire Pressure Module
    • Transmission Control Module
    • Added the setting of the DTC status icon for History Codes
  • Added right side temperature sensors for Climate Control Variant 12 modules (i.e. Dodge Grand Caravan '14)
  • Fixed Mode $6 decoding for earlier VPW-based vehicles (i.e. Chrysler Town and Country '02)
Fiat / Alfa Romeo
  • Added new ISO and Variant module support
  • Added the setting of the DTC status icon for History Codes
  • Updated DTC Description list
  • Fixed sensor ranges for V and G sensors
Ford-family
  • Resolved connection issue with Ford Flex / Lincoln MKT ECO Boost '10 - '12 PCM
  • Resolved non-SuperDuty F-250 / F-350 / F-450 / F-550 not showing enhanced coverage '96 - ' 18
  • Added RVC Configuration Special Function
  • Added Transit Connect '10 - '13 IVD Initialization Special Function support
  • Added Powerstroke 6.7L '18 DPF Regeneration (Static) Special Function support
  • Resolved connection issue with Ford Flex / Lincoln MKT ECO Boost '10 - '12 PCM
  • Resolved non-SuperDuty F-250 / F-350 / F-450 / F-550 not showing enhanced coverage '96 - ' 18
GM-family
  • Added the 6.2 Liter LSA (P) for the Chevrolet Camaro '13
  • Added missing Injector 7 & 8 to the Fuel Injector Balance for the 4.8 Liter LR4 (V) '06 engine
  • Added Idle Learn Reset for the 2.4 Liter LE5 (1) '11 engine
  • Added 2.0 Liter LHU for the Buick Regal '11
  • Added 'Reductant System Malfunction Warning Test' to 6.6 Liter LML engine '12 - '13
  • Added TAP Cell sensors for the 3.5 Liter LX9 engine '05 - '06
  • Added more Transmission Adaptions Reset system test for CAN-based Transmission '05 - '13
  • Added more Reset Transmission Adaptions actuations for CAN-based Transmission '04 - '13
  • Added Fast Learn Adaptions actuations for Non-Allison transmissions
  • Added Fast Learn Adaptions system test for Allison transmission
  • Updated Engine VIN decoding for those engines with the missing code (i.e. Chevrolet Malibu '16 1.5 Liter LFV (T))
  • Fixed DTC table lookup on some Global-A CAN modules
  • Added 1.4 Liter LUU (4) engine for 2014 (i.e. Chevrolet Volt)
  • Added Steering Wheel Position Learn for the Chevrolet Camaro '11
  • Added following commands for Global-A vehicles:
    • Body Control Module
      • Tire Pressure Sensor Signal Reset (Relabled,  previous command name 'Reset')
    • Frontview Camera Module
      • Frontview Camera Learn
    • Liftgate Control Module
      • Liftgate Maximum Open Position Learn
  • Hands-Free Liftgate Sensor Control Module Calibration
  • Passenger Presence Module
    • Passenger Presence Sensor Learn (Relabeled, previous command name 'Module Setup')
  • Video Processing Control Module
    • All Cameras Alignment Learn
    • Front Camera Alignment Learn
    • Left Camera Alignment Learn
    • Right Camera Alignment Learn
    • Rear Camera Alignment Learn
    • Show Current Frontview Camera Video
    • Show Current Left Frontview Fascia Camera Video
    • Show Current Left Sideview Camera Video
    • Show Current Rearview Camera Video
    • Show Current Right Frontview Fascia Camera Video
    • Show Current Right Sideview Camera Video
  • Added the setting of the DTC status icon for History Codes
  • Added engine code for the Chevrolet Bolt '17
  • Fixed Injector Balance command for the Saturn '01 2.2 Liter L61
  • Fixed the Fuel Injector Balance system test for VPW-based modules
  • Fixed live sensor readings for the '05 4.3 LU3 (X) Automatic Transfer Case
  • Fixed Fuel Tank Remaining Percentage for the '05 4.3 LU3 (X) Engine
  • Fixed sensor ranges for V and G sensors
  • Improved detecting supported sensors on CAN-based vehicles
  • Updated '18 Model and Engine VIN decoding
  • Removed the information message box for pulling codes on Body / Chassis modules
Honda / Acura
  • Added support for pulling VINs for CAN-based engine modules via non-OBDII commands:
  • Added the following systems:
    • CAN Gateway System system
    • Force Pedal system
  • Added the following system tests for CAN-based modules without external SWS module:
    • SWS Initialization
  • Added the following system tests for METER CAN module:
    • Unit Replacement Reset
  • Added the following system tests for CAN-based TPMS Modules:
    • Tire Sensor Learn
  • Added the following system tests for PCM:
    • Electric Waste Gate
    • EVAP Solenoid Test
    • ETCS (TAD) Test
  • Added the following system tests for CAN-Based TCM AT:
    • TCM / PCM Reset
    • Clutch Pressure Control Solenoid
    • Shift Lock Solenoid
    • Shift Solenoid Test
  • Added the following system tests for CAN-Based TCM CVT:
    • TCM / PCM Reset
    • Shift Lock Solenoid
    • Shift Solenoid Test
  • Added the following system tests for Honda ABS:
    • CAS Solonoid Test
    • Pulse Test
  • Added the following system tests for Bosch ABS Type 3 (i.e. Acura MDX '07):
    • Steering Angle Sensor Center Point Writing
  • Added the following system tests for the CAN-based EPS:
    • MA-EPS Control ON/OFF
    • Steering End Learning
  • Added the following system tests for SH-AWD:
    • Initialization
    • Functional Test
    • Clutch Coil Test
    • Shift Solenoid Test
    • Neutral Rewrite
    • Differential Torque
    • Steering Angle Sensor
    • YAW Rate/Lateral Acceleration Sensor
    • All Sensor
  • Renamed the system 'Electric Brake Vacuum Pressure System' to 'Electric Vacuum Pressure System'
  • Renamed the system test 'IMC (IMRC) Test' to 'IMT (IMRC) Test'
  • Renamed the system test 'Neutral Rewrite' to 'EPS Steering Angle Sensor Value Clear'
  • Added following system test:
    • A/C Clutch Test
    • Fuel Pump ON
    • Fuel Pump OFF
    • One Injector OFF
    • Radiator Fan
    • Throttle Position Check
  • Fixed communication issues with KWP1281-based ABS Modules (i.e. Honda Ridgeline '06)
Hyundai / Kia
  • Added 18MY support
  • Added AMP SW Management function AMP Operation Test
  • Added Adaptive Front Lighting System SW Management function Calibration Test
  • Added HEV Battery SW Management function SOC Battery Calibration
  • Added Blind Spot Detection SW Management function BSD Calibration
  • Added Blind Spot Detection Left and Right SW Management function BSD Calibration
  • Added Central Gateway SW Management function Erase Network Configuration
  • Added ESC ABS and ESC AHB SW Management function HCU Air Bleeding Mode
  • Added MPI 2.0L Powertrain SW Management function EVAP Leak Test and ETC Test
  • Added MPI 3.5L Powertrain SW Management function EVAP Leak Test and ETC Carbon Cleaning
  • Added Integrated Power Management Control Module SW Management function Erase Network Configuration
  • Added Motor Driven Power Steering SW Management function ESP Type Recognition, Set Steering Feel Torque To Zero, and Steering Angle Sensor Calibration
  • Added Passenger Seat Module SW Management function Seat Limit Position
  • Added SRS Airbag CAN some variants SW Managements function ACU / SRSCM Variant Coding
  • Added Steering Column Module SW Management function Steering Limit Position Setting
  • Added TPMS SW Management function Wheel Sensor ID Writing
Nissan / Infiniti
  • Added Kicks '18 model support
  • Added QX50 '19 model support
  • Added Auto Drive Position CAN (Rev2) Exit Seat Slide Setting, Exit Tilt Setting, and Seat Slide Volume Set Work Support functions
  • Fixed DTCs reporting when Gateway CAN drops out of network
Subaru
  • Added 18MY support
  • Added Blindspot, Eyesight, and Infotainment system support
  • Added Transmission CVT CAN actuations

June 2018

Mobile Application

Versions:
  • Android - 1.89.38.993

  • Windows - 3.89.652

Updates:
  • Inspection Process Updated to Use a Single Customer Record

  • Now includes recent enhancements to ALLDATA Repair web application. 

  • Bug fixes/minor enhancements

Vehicle Connection Interface

Diagnostics VCI Version - 16.1.2

Updates:
  • Added Ford and GM functionality

  • Updated Chrysler, GM, Honda and Mitsubishi functionality